Straight-tooth milled gear racks are high-precision mechanical components engineered to convert rotational motion from mating spur gears into smooth, reliable linear travel for automated industrial machinery, CNC systems, and material handling equipment.
Straight tooth orientation eliminates axial thrust loads, simplifying bearing integration and reducing structural frame stress.
Precision-milled tooth flanks maintain uniform pitch spacing over extended strokes to prevent mechanical binding.
Rectangular cross-sections and ground reference edges ensure secure bolting alignment directly to machine beds.
Optimized tooth depth and root geometry distribute continuous mechanical loads evenly across active contact zones.
|
|
|
|
|
ISO Module 1.0 to Module 10.0 |
|
|
DIN 8 to DIN 10 (Milled precision tier) |
|
|
500 mm, 1000 mm, 2000 mm (custom lengths available) |
|
Cross-Section Profiles |
|
|
|
20℃ standard |
|
|
Ground reference faces; untreated or black-oxidized teeth |
Engineered for constant velocity ratios during continuous meshing cycles.
Optimized trochoid root clearance avoids tooth tip interference with mating pinions.
End-to-End Jointing: Machined segment ends allow seamless multi-piece alignment for long-travel axes.
Mechanically deburred edges ensure safe handling and precise flush seating against guide rails.
|
|
|
|
|
|
C45 Carbon Steel |
|||
|
C45 / 40Cr |
HRC 48–52 |
||
|
20CrMnTi Alloy |
HRC 58–62 |
High-purity steel bars undergo ultrasonic inspection for internal defects.
High-speed CNC rack milling machines cut symmetric tooth profiles using specialized form cutters.
Hydraulic straightening presses eliminate internal thermal and mechanical distortions.
Mounting reference surfaces are precision-ground parallel to pitch lines.
Automated gear centers record single pitch deviations (fp) and total cumulative errors (Fp).
Optical comparators and laser probes verify tooth depth, pressure angle, and flank symmetry.
Rockwell testers verify surface layer and core hardness consistency.
Serial numbers and batch codes are laser-etched onto every rack segment.
Drives gantry bridges on plasma, laser, and flame cutting machines.
Powers multi-axis routing and high-speed material positioning rigs.
Drives heavy-duty storage and retrieval systems (AS/RS) and transfer shuttles.
Integrates into linear actuator modules, packaging lines, and conveyor tracking systems.
Tailored modules, special pitches, and custom pressure angles (14.5℃, 25℃) built from drawings.
Stainless steel (AISI 304 / 316) or engineering plastics for corrosive environments.
Custom counterbored holes, tapped holes, dowel pinholes, or stepped positioning shoulders.
Interlocking step-joints engineered for zero-gap continuous connection across long axes.
A: Milled racks achieve DIN 8–10 accuracy suitable for general automation and moderate-speed drives. Ground racks undergo tooth grinding to reach DIN 5–7 for high-speed, high-acceleration CNC machine tools.
A: Yes. Precision-machined ends allow end-to-end joining. Using a matching pinion or alignment gauge ensures correct pitch spacing across joints.
A: C45 carbon steel is the standard default, offering reliable strength and machinability for general industrial loads.
A: Components are shipped with anti-rust oil coating. Black oxide treatment or stainless steel options are available for humid environments.
Populiarus Žymos: straight-tooth milled gear rack, China straight-tooth milled gear rack manufacturers, suppliers, factory


